Zebra Rw 220 User Manual - Usb

28

RW Series User Guide

The other end of the cable must be plugged into the host 

terminal as shown in Figure 15, or to a serial port on a com-

puter as shown in Figure 15.  Communications between the 

terminal and the printer are controlled by the applications run-

ning on the terminal and the printer.

USB 

RW series Printers also can communicate by cable via the 

USB protocol.  The USB port is 

a USB Mini-AB type connector 

located directly above the 10- pin modular connector used for 

RS232C communications. (Refer to Figure 13)

Figure 14: Communications to a Terminal

Figure 15: Communications to a PC

continued

Communications 

Cable

Part number varies.  Refer to 

Appendix A

Printer Communications 

Port

RS232 

Communications Cable

Refer to Appendix A for part 

number

USB 

Communications 

Cable

Refer to Appendix A for 

part number