Zebra Rw 220 User Manual - page 50

50

RW Series User Guide

RW 220 Vehicle Cradle

The RW 220 can be used in conjunction with a docking 

Cradle.  When the printer is “docked” it can be powered by ei-

ther its own battery or one of the RCLI series of external char-

gers.  Refer to the documentation supplied with the Cradle for 

more information.

Installing the Printer in the Cradle

Refer to Figure 24.

   Important • It is recommended as a safety precaution that the 

adjustable shoulder strap be removed prior to docking the Printer.  This 

precaution ensures the strap will not interfere with proper operation of 

the vehicle. 

•  Place the bottom of the printer over the two pins in the  

Cradle.  

•  Rock the top of the Printer into the  Cradle and press firm-

ly until it latches in place.  

Figure 24: Installing the RW 220 in the Cradle

Place the 

Printer over the 

retaining pins in 

the Cradle.

Rock the Printer into 

the Cradle to latch it in 

position.