3Com VCX V7000 Telephone Manual - page 20
20
C
HAPTER
2: VCX V7000 M
ANAGER
’
S
T
ELEPHONE
— M
ODEL
3103
Status Lights for
Access Buttons
An Access button that is set up for incoming and outgoing calls indicates
the status, as shown in
Table 3
.
Table 3 Status Lights for Access Buttons
If the light is
The line is
Off
Available for use
Steady
In use
Feature Options
Your Manager’s phone provides a full range of features. You can access
some of these features (for example, call transfer) by pressing a dedicated
button. These features, and basic phone operations such as making and
answering calls, are described in
Chapter 3
,
Basic Telephone Operation
.
You can access some Manager’s phone features by pressing the Features
soft button, as shown in
Figure 3
. You can then enable a feature using
either of the following methods:
1 Press the Features soft button.
2 Enter the three-digit feature code on the keypad (see
Feature Codes
).
3 Enter any additional values following display panel prompts.
Or
1 Press the Features soft button.
2 Scroll to the feature by pressing the Scroll Down (
) button.
3 Press the Select soft button.
4 Enter any additional values following display panel prompts.