3Com VCX V7000 Telephone Manual - page 28

28

C

HAPTER

 3: B

ASIC

 T

ELEPHONE

 O

PERATION

User Interface (TUI) and change the local password to match the 

password stored on the call processor by following these steps:

1 Press the bottom right soft button (Advanced Settings)+ 5. 

The Display Panel shows:

Enter Password: 

2 Enter your new password and press #.

The VCX call processor periodically communicates with each VCX 

telephone. If you change your password through the VCX User Interface 

but do not change it through the TUI, the VCX call processor detects a 

password mismatch and logs you out. If this happens, follow steps 1 and 

2 to log in.

Answering a Call

To answer an incoming call, lift the handset. 

Alternatively, you can press the Speaker button. If you have enabled 

Handsfree Active on Intercom, you can simply speak to answer internal 

calls.

If your phone includes multiple access lines, press the Access button for 

the line on which the new call is arriving (the light next to the button will 

be flashing).

If you have multiple calls, press the left line soft button for the line on 

which the new call is arriving. 

The Display Panel can display up to ten active calls, but only three can be 

visible on the display. To access active calls that are not visible, use the 

scroll down button. If the Display Panel contains ten active calls and you 

have a new incoming call, it is forwarded to your voicemail.

Unanswered calls are sent to either your call coverage point which, by 

default, is your voice mailbox or your configured call forwarding 

destination. See 

Configuring a Call Coverage Point

 or 

Call Forwarding

.