ABB LS4000 Operating Instructions Manual - page 37
LS4000, LS4060 DIODE LASER ANALYZERS | OI/LS4000/O2-EN REV. A
37
Scope of delivery
Unpack all parts included in the scope of delivery.
Ensure that all delivered parts match your order.
Qty. Description
1
Transmitter unit with connection cable and protective cap for the lens
1
Receiver unit with connection cable and protective cap for the lens
1
Junction box, power supply (if ordered) installed, cable glands pre-
installed
1 Ethernet
adapter
2
Purging flanges with seals and fastening clips (as per the order)
1
Analyzer data sheet (in the junction box)
1 Operating
instruction
1
DVD-ROM "Software tools & technical documentation"
Accessories included as per customer order
If the power supply is not included with the unit: Purchase a power supply and
a connection cable according to the following specifications:
Qty. Description and specification
1
Power supply:
Primary voltage: AC 100–240 V ± 10 %, mains frequency: 50 to 60 Hz,
Secondary voltage: DC 24 V ± 10 %, output current: min. 400 mA,
Overload protection: power limitation
1
Secondary voltage connection cable DC 24 V to junction box:
Outside diameter: min. 7 up to max. 12 mm, wire cross-section: min.
1.5 up to max. 2.5 mm
2
(AWG 16–14), cable length: max. 30 m
The power supply from a 24 V direct current mains network is not
allowed.
Keep the transport packaging of the transmitter and receiver units for possi-
ble return. Keep the yellow protective caps of the lenses for service purposes.
Dispose of the residual packaging material in accordance with local regula-
tions.
Finally, check that all parts are complete and in perfect condition.
If …
then …
all parts are in perfect condition the installation process can be started.
one or more parts are missing
or are not in perfect condition
the laser analyzer must not be installed.
Unpacking devices
and accessories
Identifying devices
and accessories
Purchasing a power
supply and
connection cable
Disposing of
packaging material
Final check