Anthem AVM 20 Setup Menu - 7. Setup Menu
51
7. SETUP MENU
continued …
Example 1: Set Right Front speaker distance to 9.5 feet.
• Enter the Setup (section 7.1). Go to ‘5. LISTENER POSITION’ and press SELECT.
• Press the
' button until you reach “d. RIGHT FRONT: 12.0 ft”.
• Use the
"# buttons to change to ‘9.5 ft’.
• When finished, press
&' to go to another menu item, or...
• Press BACK to leave the submenu and return to the main menu.
Example 2: Set DVD Audio Group Delay to 16 milliseconds.
• Enter the Setup (section 7.1). Go to ‘5. LISTENER POSITION’ and press SELECT.
• Press the
' button until you reach “5j. SET AUDIO GROUP DELAY” and press SELECT.
• Press the
' button until you reach “DVD”.
• Use the
"# buttons to change to ‘16 ms’.
• When finished, press
&' to go to another menu item, or...
• Press BACK to leave the submenu and return to the main menu.
7.4.6 SPEAKER LEVEL CALIBRATION
Speaker Level Calibration allows you to match the relative output level of each speaker at the listening
position. As a convenience, both MAIN Volume and Mute still operate when you are in the Setup. Be sure
that MAIN is unmuted, otherwise you will not hear sound in the Speaker Level Calibration.
Note: The FRONTS, CENTER, SURROUNDS, REARS, SUB, and BALANCE buttons on the Front Panel and
Remote Control DO NOT affect this menu – they allow ‘on-the-fly’ adjustment of individual
program material as may be required (sections 5.6 and 5.7).
Test Sequence:
Lets you select whether the test noise will travel from speaker to speaker manually, or automatically in
2 second intervals.
Noise Reference Level:
Sets the master level of the noise signal. Normally for use with an SPL meter, the proper setting depends on
your amplifier’s and speakers’ sensitivity.
Note: You must select a Source that is set to ‘Digital’ or ‘Anlg-DSP’ prior to conducting the Speaker
Level Calibration, otherwise no test signal will be heard. (‘Anlg-Dir’ bypasses the signal generator.)
6. SPEAKER LVL CALIBRATION
a. TEST
SEQUENCE : Off
b.
NOISE REF LEVEL : –9.0 dB
c.
LEFT FRONT : +0.0 dB
d. CENTER : +0.0
dB
e.
RIGHT FRONT : +0.0 dB
f.
RIGHT SURROUND : +0.0 dB
g.
RIGHT REAR : +0.0 dB
h.
LEFT REAR : +0.0 dB
i.
LEFT SURROUND : +0.0 dB
j. SUBWOOFER : +0.0
dB
k.
SET BASS PEAK LEVEL