Anthem AVM 20 Setup Menu - 7. Setup Menu
43
7. SETUP MENU
continued …
Example: Rename AUX to ‘GAME’.
• Enter the Setup (section 7.1). Go to ‘1. RENAME SOURCES’ and press SELECT.
• Press the
' button until you reach “c. AUX: AUX”.
• Press SELECT. The first character ‘A’ will be highlighted in red.
• Use the Master Control Knob or the
&' buttons to change characters. Change the first one to ‘G’.
• Press the
# button to move to the next character. Change it to ‘A’.
• Use the
"# buttons to move to each remaining character. Change to ‘M’ and ‘E’.
• When finished, press BACK then &' to go to another Source or...
• Press BACK twice to leave the submenu.
7.4.2 AUDIO/VIDEO-IN FORMAT/MAIN
The Audio/Video-In Format/MAIN menu lets you select Digital, Analog-DSP, or Analog-Direct for each
Source. Set Source Equalization allows you preset low and high frequency levels for each input that is set
to Digital or Analog-DSP. This menu is also where a Source is assigned to each of the the two Component
video inputs. Audio/Video-In Format/MAIN selections apply to the MAIN Path only.
There are three input formats to choose from:
Anlg-DSP (Analog – Digital Signal Processing):
The analog input is converted to digital by the AVM 20’s internal high quality A/D converters to allow Digital
Signal Processing, such as Bass, Treble, Mode, and all bass management to take place. Bass management
is determined by the Speaker Configuration as described in section 7.4.4.
Through the Anlg-DSP setting, the AVM 20 makes it possible to manage the bass of any input, including
6-Ch S/E. This is a very useful feature if you’re using a DVD-Audio player and small Center or Surround
speakers, because the bass can be extracted from speakers set to ‘Small’ and directed to the
Subwoofer. In addition, delay for individual speakers takes effect to time-align speaker distances
relative to the listening position – see sections 7.4.4 and 7.4.5 for detailed explanations.
Anlg-Dir (Analog – Direct):
No A/D conversion takes place – all Digital Signal Processing such as Bass, Treble, Mode, and bass
management are bypassed. Only Volume, individual speaker level (Main, Fronts, Surrounds, Rears, Sub),
Balance, and Mute still function.
2. AUDIO/VIDEO-IN
FORMAT/MAIN
a.
CD : Anlg-DSP
+0.0 dB
b.
2-Ch : Anlg-Dir
+0.0 dB
c.
6-Ch : Anlg-DSP
+0.0 dB
d.
TAPE : Anlg-DSP
+0.0 dB
e.
FM/AM : Anlg-DSP
–5.0 dB
f.
DVD : Digital
RCA
g.
TV : Anlg-DSP
+0.0 dB
h.
SAT : Digital
RCA
i.
VCR : Anlg-DSP
+0.0 dB
j.
AUX : Anlg-DSP
+0.0 dB
k.
SET SOURCE EQUALIZATION
l.
COMPONENT VIDEO 1 :
DVD
m.
COMPONENT VIDEO 2 :
SAT