Cajun Injector Injector Owner's Manual - Assembly Instructions

Step 3

Place aluminum fryer basket inside metal inner 

•

pot. 

Step 4

Place glass lid on last after assembly of all 

•

other parts. Align the notch on the lid with the 

metal coils on heating element. 

Note: Glass lid will not fit tightly when basket is in 

use during cooking process.

Step 5

Connect the power cord to the connection 

•

      under the control panel and heating element. 

Assembly Instructions

Drain Valve Operation (select models only)

The drain valve, located near the bottom rim of the frying pot, allows you to safely and 

•

easily drain water/oil from the pot.

BE SURE THAT ANY LIQUID INSIDE OF THE POT IS BELOW 100°F BEFORE DRAIN-

•

ING.

Liquid should primarily be drained into a container before disposal.

•

Place your desired reservoir directly under the drain valve nozzle; be sure that both the 

•

reservoir and the fryer are sturdy and not easily tilted.

Turn the black switch on top of the drain valve nozzle 180°F or until a steady flow of liquid 

•

is being dispersed from the nozzle into the reservoir.

Close the valve by turning the switch to its original position once all of the liquid has 

•

drained.

Some frying oils can be reused within a few days; many people find the drain valve a 

•

useful mechanism to direct their frying oil back into its original container to be used at a 

later date.

Power Cord 

Connection