Eatel FiberEdge User Manual - About Your Remote Control
9
Continued on Next Page
About Your Remote Control
Your EATEL FiberEdge TV remote control is a universal remote control which allows you to
control your FiberEdge STB as well as your TV, VCR, DVD, and audio component. Refer to the
manual that you received with the remote to get instructions on how to program it to work with
the various components. While remote control models may vary slightly, basic functionality is
the same on all EATEL remotes.
To access the device you wish to use, press the appropriate mode button on your remote (TV,
CBL, DVD, VCR, etc.), then use the other buttons to perform the necessary tasks. The remote
will “remember” which device you are working with until you select a different device using
the mode buttons.
For example, if you want to turn on and use the VCR, press the VCR button on the remote, then
the power button, then use the remote to control the VCR. When you are finished using the VCR
and want to watch TV, simply press the cable button on the remote (CBL). Remember to point the
remote control directly at the STB if you are using it to control your FiberEdge Digital TV service.
See the remote control diagrams on the following pages for more information about your specific
remote. If you need additional assistance programming your remote, refer to the manual that you
received with it, or contact EATEL.