Eatel FiberEdge User Manual - page 53
52
Duration of Caller ID Display on Your Screen
The default setting for the TV Caller ID display is 15 seconds. However, this setting can be adjusted.
Changing Your Caller ID Display Duration
To change Caller ID display duration:
1.
Tune to Channel 411.
2.
Use the
Up
or
Down
arrow buttons on your remote to scroll to “Settings” and
press the
Select
button
.
3.
Use the
Up
or
Down
arrow buttons to scroll to “Caller ID Settings” and press
the
Select
button
.
4.
Use the
Up
or
Down
arrow buttons to scroll to “Set Caller ID Display Duration”
and press the
Select
button
.
5.
Use the
Up
or
Down
arrow buttons to locate your preferred duration. Options
range from 5 to 240 seconds. Press the
Select
button
to set the display duration.
Note: Caller ID Display Duration settings are STB-specific and changes will only apply to the TV
on which you make them. Follow the same instructions above to make changes on each TV with
a STB in your home.
TV Caller ID