Eatel FiberEdge User Manual - 3250Hd Back Panel Overview
1 Serial Number
Located in the left corner of the bar code. EATEL may ask for this number if your
system requires troubleshooting.
2 1394 FireWire*
Connect to optional 1394-equipped (FireWire) devices. This connector is reserved
for future use and may not be available on all 3250HD models.
3 Optical Audio Out*
Connect an optical cable to send a digital audio signal to a surround-sound
received or the digital audio device. This connector may not be available
on all STB models.
4 DVI*
Connect to the DVI (Digital Video Interface) input port on your HDTV.
This port provides digital video signals to the HDTV.
5 IR*
Connect the IR Blaster cable to use with the optional VCR Commander
™
service.
6 S-Video Out
Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signal
is standard definition, but higher quality than other SDTV connections.
7 YPbPr Out
Connect the HDTV (Y, Pb, Pr) component output ports to the HDTV input
on your HDTV. You must use these ports to provide HDTV signals to a
surround-sound receiver or other digital audio device.
8 Digital Audio Out
Connect an RCA cable to send a digital audio signal to a surround-sound receiver
or other digital audio device.
9 Video & Audio Out
Connect an RCA cable to Video Out and Left/Right Audio Out to send
analog video and audio signals to a standard VCR. This signal is SDTV.
10 Cable Out
Connect a coaxial cable to Cable Out to send analog audio and video
signals to a TV or VCR. These signals are SDTV video with mono audio.
11 Audio Out (L and R) Connect RCA cables to Audio Out to send analog audio signals (left and right) to a
stereo receiver or a TV with stereo outputs.
12 Cable In
Connect to the coaxial cable coming from the wall.
13 Bypass*
Connect an optional RF Bypass module to the set-top. This module allows viewing
one channel while recording another.
14 AC Switched Outlet Connect the AC power cord from another device, such as a TV.
15 AC Power Input
Connect the STB to an AC electrical outlet using the cord provided.
*If available. Contact EATEL for more information.
3250HD Back Panel Overview
33
Continued on Next Page