Eatel FiberEdge User Manual - 8300Hdc Back Panel Overview
8300HDC Back Panel Overview
39
1 Cable In
Connects to the coaxial cable coming from the wall.
2 Cable Out
Connects to a coaxial cable that sends analog audio and video signals to a TV
or VCR. These signals are standard-definition TV (SDTV) video and stereo audio.
3 HDTV
Connects to the component video input (YPbPr) on the HDTV, when in HD mode.
When in SD mode, the Y/V portion of the component video output connects to the
composite video input of a TV.
4 Digital Audio Out
Connects to an RCA cable that sends a digital audio signal to a surround-sound
receiver or other digital audio device.
5 Out 2 (Secondary
Connects to either a VCR for archiving saved content from the DVR or connects
Video/Audio Out)
to another set of inputs (composite) on your TV.
6 Audio Out
Connects to RCA cables that send analog audio signals (left and right)
(Left and Right)
to the stereo inputs on a TV.
7 Optical Audio
Connects to an optical cable that sends a digital audio signal to a surround-sound
Output
receiver or other digital audio device.
8 S-Video Out
Connects to an S-Video cable that sends an S-Video signal to your TV or VCR.
This signal is standard definition, but higher quality than other SDTV connections.
9 IR
Connector reserved for future use.
10 HDMI
Connects an HDMI™ cable to the HDMI input of an HDTV. HDMI supports
both digital audio and video. May be used to connect to a DVI interface using
an HDMI-to-DVI adaptor for video and separate audio connections. Any of the
following audio connections may be used: Digital Audio Out (4); Audio Out:
Left and Right (6); or Optical Audio Output (7).
11 M-Card Interface
Installed by your service provider.
12 SATA
Connect to an external Serial ATA (eSATA) hard disk drive for expanded recording
capability. Please check with EATEL for a list of approved hard drive models for use
with the 8300HDC.
13 1394 Firewire
Connects to display devices that are equipped with a 1394 input.
14 AC Outlet
Connects to the AC power cord from another device, such as a TV.
15 AC Power Input
Connects to the power cord to deliver power to the DVR.