Eatel FiberEdge User Manual - Map Services
51
Continued on Next Page
Map Services
TV Caller ID is enabled automatically for all EATEL phone customers with Caller ID service
and our FiberEdge Digital Edge TV package. Using the Map Services option on Channel 411,
you can adjust this automatic setting and choose to disable or enable TV Caller ID for multiple
phone lines in your home.
Adjusting Map Services Settings
To adjust map services settings:
1.
Tune to Channel 411.
2.
Use the
Up
or
Down
arrow buttons on your remote to scroll to “Settings” and
press the
Select
button
.
3.
Use the
Up
or
Down
arrow buttons to scroll to “Map Services” and press the
Select
button
on your remote.
4.
Use the
Up
or
Down
arrow buttons to scroll to the phone number for which you
would like to adjust the settings and press the
Select
button
.
5.
Use the
Up
or
Down
arrow buttons to scroll to either “Caller ID On” or “Caller
ID Off” for the specified phone line. Press the
Select
button
to turn the service on or off
for that phone line, on that TV. The asterisk to the left of the selection, [*], indicates which
setting is currently active.
Note: Map Service settings are STB-specific and changes will only apply to the TV on which
you make them. Follow the same instructions above to make changes on each TV with a STB
in your home.