Gardsman CTC-1132 Installation, Programming, Operating - Device Naming
21
Control Panel will give a Medical
Emergency alarm when the panic
button is pressed for 3 seconds long
or twice within 3 seconds.
StepC8. Use the S&T keys to make your
selection and confirm by pressing
OK key. The next display will prompt
you to give a name or location
description to the device to help
understand system events. You can
enter up to 10 letters as you please
for the name.
StepC9. Or simply press OK key for no name.
Please see section Device Naming
for details.
E
n
t e r N a m e +
O
k
. . . . . . . . . .
StepC10. Press OK key when finished and the
display will show the new zone
name next to the device:
I n s t a l l e d : ( O K ? )
R
C
M
R
. S M
I T
H
StepC11. Press OK key, adding a RC is now
completed, screen returns to the
Device +/- menu.
<
<
N
N
O
O
T
T
E
E
>
>
)
After a Remote Controller is added in,
you can use the Remote Controller to
arm/disarm the system. In addition,
pressing the Panic button for 3
seconds or twice within 3 seconds, the
Control Panel will generate a Panic
alarm.
)
The Panic alarm generated from the
Remote Controller will have to be
silenced at the Control Panel only.
See section Stop the Alarm.
)
Press
key,all the learning/setting
processes having done will be ignored,
the screen returns to Device +/- menu.
Other Devices
For Smoke Detector, Remote Keypad, Water
Sensor and Night Switch, no further option
needs to be specified, hence after it is detected,
a zone is assigned, and the zone name
entered, the following screen is displayed.
I n s t a l l e d : ( O K ? )
S D L i v i n g r o o m
Press OK key to confirm, adding a smoke
detector, or a Remote Keypad or a Water
Sensor or a Night Switch is now completed.
Device Naming
Detectors can be given names and location
descriptions to help understand system events.
The devices can be named when first installing
them or by editing them afterwards, the
procedure is similar for both situations.
z
When
the
Enter zone Name screen is
displayed, the keypad can be used to
enter text. Simply locate the
corresponding numeric keys to the desired
alphabets/symbols and press repeatedly
until the wanted alphabets/symbols appear.
Release the key and the flashing cursor
automatically jumps to the next position for
you to continue with the next letter by the
same method.
z
The keys have the following functions:
z
When the name is complete, press OK
key to confirm and return to the previous
or main menu.
<
<
N
N
O
O
T
T
E
E
>
>
)
The name can be erased or clearing
the display by entering backward
spaces and pressing OK key.
¿
¿
# #
4
Delete character
and backspace
1 1
2 2ABCabc
3 3DEFdef
4 4GHIghi
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0 0