Jacuzzi J - 355 Owner's Manual - J-300 Series
J-300 Series
9.0 Control Functions
9.1 Control Panel
A. LED Display: Can display
current water temperature
(default display), water
temperature set point,
selected filtration/heating
mode, and error messages.
B. Warmer (
) Button:
Increases water temperature
set point.
C. Cooler (
) Button: Decreases water temperature set point.
D. Light On/Off
Button Options:
Turns waterfall, footwel light, lighted cups holders and backlit pillows on
in unision. Press once for high intensity; press a second time for medium
intensity; press a third time for low intensity; press a fourth time to turn off.
The displayed color is changed using the light mode button (E) below.
E. Light Mode
Button: Selects one of 5 color modes for waterfall, footwell,
cup holders, and pillow lights. See page 22 for addition information
F. Jets 1 Button: Turns jets pump #1 on and off. Press once for low speed;
press a second time for high speed; press a third time to turn pump off.
G. Jets 2 Button (J-335 - J-375): Turns high-speed jets pump #2 on and off.
Press once to turn pump #2 on; press a second time to turn pump #2 off.
H. Heat Indicator: Lit when heater is on.
Operation Details
Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default setting
is 100°F (38°C).
Light Operation: All LED lights run for 1 hour, then automatically shut off.
Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when activated, then
turn off automatically to conserve energy. Simply press either jets button to
continue operation for an additional 20 minutes.
•
•
•
H
A
2-Pump Control Panel Shown
B
C
D
E
F
G
H
A
2-Pump Control Panel Shown
B
C
D
E
F
G
19