Jacuzzi J - 355 Owner's Manual - J-300 Series
J-300 Series
A
Turn Power To Spa OFF!
B
Lift cover approx. 3/8" to
unclip, then tilt forward to
access filter cartridges.
C
(Filter Cover Back View)
Remove skimer bag from
clips, then clean out debris.
D
Rotate each filter cartridge
handle counterclockwise to
unthread from mating wall
fitting.
E
Lift unthreaded filter
cartridge from skimmer
well.
F
If used, remove the chem-
ical feeder as instructed
prior to rinsing the filter
cartridges. Rinse debris
from filter pleats on each
cartridge using a garden
hose and high pressure
nozzle. Start at the top and
work downward towards
handle. Repeat until all
pleats are clean.
G
Trapped
Air
Bubbles
Cartridge 1
Cartridge 2
Submerge both filter
cartridges in spa. Tilt
threaded end upward
to remove trapped air
bubbles, then keep
cartridges submerged to
prevent air entrapment
during installation (step
H).
27