Jacuzzi J - 355 Owner's Manual - J-300 Series
J-300 Series
desired angle to customize your personal massage.
Note: Always keep at least 6
adjustable jets open at all times to ensure proper filtration characteristics within
the spa.
10.6 Adjusting PowerPro Jets
With the nozzles of the PowerPro Jets positioned straight
ahead, the jet stream will be stationary. Pushing the nozzle to
one side causes the jet nozzle to rotate, moving the jet stream
in a circular pattern.
Note: Jets may not spin with jets pump
1 running in low speed.
10.7 Selecting Desired Massage Action
All models incorporate a massage selector valve that allows
you to customize the massage and performance by diverting
water between various jet systems within the spa. Simply turn
valve to positions A, B or C to divert water pressure to various
jet groups. Note: The valve is intended to operate in positions A (Combo), B,
or C for optimum performance. It is considered normal for sound levels within
the valve to increase between these positions due to the large amounts of water
flowing through it! For optimum filtration benefits, always leave this valve in
position A when the spa is covered and select positions B or C for maximum jet
performance during spa use.
10.8 Waterfall Feature
The waterfall feature allows you to independently control it for a customized
soothing effect. The JETS 1 button activates the waterfall feature. Note: The
operation of the waterfall light feature is covered in sections 10.3-10.4 (page
Waterfall Operation Details:
• J-315/J-325 Models: Move control lever next to the waterfall body inward
to start or increase flow or move outward to slow or turn off flow.
• J-335, J-345, J-355, J-365 & J-375:
A. Push thumb wheel on top of waterfall to the left (while in spa) to start or
increase flow.
B. Push thumb wheel on top of waterfall to the right (while in spa) to slow or
turn flow off.
10.9 Air Controls
Certain jet systems have their own “toggle” on/off air control.
Each control introduces air into the water lines that supply
specific jet groups. Simply press any air control button Jacuzzi
logo side down to open or press the opposite side of button to
close.
Note: To minimize heat loss, close all air controls (Jacuzzi logo up) when spa is
C
B
A
C
B
A
23