Jenn-Air JMD2124WS Technical Education - page 25
Other manuals for JMD2124WS:
Use And Care Manual, Installation Instructions Manual
of
52
4-3
7. To remove the Control Panel Assembly,
remove the top panel as outlined in step
5 in this section.
8. Remove (2) screws on each end on the
back of the control panel, see figure 7.
9. Unsnap the top control panel assembly
from the frame and drop down to the front
of the microwave, see figure 8.
10. Unplug all wires. The frame and Power
Control Board can now be serviced,
see figure 8.
7. Remove exhaust duct and back cover
(see figures 5 & 6).
Figure 5
Figure 6
ACCESSING INTERNAL COMPONENTS (continued)
Back Cover
Screws
Exhaust Duct
Cover Screws
Figure 7
Two Screws
Figure 8
Control Panel
Frame
Control Panel
Power Control
Board