Jenn-Air JMD2124WS Technical Education - Removing The Oven Lamp
4-7
REMOVING THE OVEN LAMP
1. Unplug microwave drawer or disconnect
power.
2. Remove the microwave drawer from the
cabinet.
3. Remove one screw securing the ac-
cess panel to the right front top of the
microwave. The access panel is held in
place by two tabs that engage two slots
toward the rear, see figure 1.
4. To replace the oven lamp or lamp holder:
Remove one screw securing the lamp
housing to the top of the microwave, see
figure 1.
5. Disengage the tab on the opposite side
of the housing to access the lamp and
lamp holder, see figure 2.
6. Unscrew the lamp and replace,
see figure 2.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Access
Panel
Slots
Lamp
Housing
Lamp
Housing
Screw
Lamp
Holder Screw
Figure 1
Figure 2
Lamp
Holder Screws
Lamp
Holder
Connectors
Lamp
Tab