Jenn-Air JMD2124WS Technical Education - Warning
4-14
5. Remove two screws securing the
base of the transformer to the microwave.
6. Disengage two tabs from the slots at the
rear of the transformer on the microwave
base.
7. Remove connections and replace the
transformer.
REMOVING THE HIGH VOLTAGE TRANSFORMER
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
1. Unplug microwave drawer or disconnect
power.
2. Remove the microwave drawer from the
cabinet as outlined in steps 1-4 of
Accessing Internal Components (see
page 4-2 for the procedure).
3. Remove the top, side and back panels
as outlined in the steps Accessing
Internal Components (see page 4-2 and
4-3 for the procedure).
4. Discharge the high voltage
capacitor terminals with a 20,000 W
2 watt resistor to chassis ground.
Figure 1
Two Screws
Two Slots
Behind
Transformer