Karassn KS-200B Series User Manual - page 4
100-Zone Wireless Alarm System
-
3
-
100-Zone Wireless Alarm System
-
22
-
1
、
The transmit address code should not be empty (0000); otherwise, it cannot
transmit signals.
2
、
The detector being transmitted must be 315MHZ VD5026; it does not support
other forms.
3
、
It only can transmit in arm state, it cannot transmit in disarm state.
11. Main Technical Specification
1. KS-200B Series Alarm Host
Wireless Receive Sensitivity: 0.2μV (12dB)
Working Voltage: AC 220V ±15% 50Hz, DC 12V-13.8V
Working Current: standby current 75mA, Alarm Current 350mA.
Working Environment: -10
℃
~
50
℃
Alarm Loudness: 100 dB within 1m
2. Wireless PIR Detector
Working Voltage: AC 220V ±15% 50Hz, DC 12V-13.8V
Working Current:: standby current 10mA, Alarm Current 500mA.
Working Environment: -10
℃
~50
℃
Infrared Detector Distance: 1-12m, 60°up and down, 110°right and left.
12. Standard Packing List
(1) KS-200B Alarm Host
1PC
(2) Antenna
1PC
(3) KS-200B User Manual 1PC
(4) Maintenance Card
1PC
13. Optional Packing List
(1)KS-200AT Wireless PIR Detector
(2)KS-200ACT Wireless PIR Detector
(3)KS-200ATI Wireless PIR Detector ( It can be armed independently, and it has
transmit function.
(4)KS-200BCT ( It can alarm on the spot)
(5)KS-200BTI Wireless PIR Detector ( It can be armed independently, and it can
alarm on the spot, moreover, it has transmit function.)
(6)KS-50AI Wireless Emitter ( It can transmit wired/wireless detectors)
(7)KS-10A Wireless Remote Controller
(8)12V 1.2Ah Backup Battery
≤
≤
≤
≥
≤
≤