Karcher K 2.110 M Operator's Manual - Working With Detergents
7
WORKING WITH DETERGENTS
Detergents can only be applied at low pressure (-).
For best results see Cleaning
Tips on pages 9 & 10 for specific
information on how to clean
different surfaces.
Always Use Kärcher
Detergents for Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure washer. The
special formula won’t clog the suction tube
filter and will protect the internal parts of the
pressure washer for a longer life. For Kärcher
Detergents, check your retailer or call:
Step 1
To apply detergents install the Vario spray
wand. Set the Vario spray wand to the low
pressure setting (-) by turning the wand collar.
The wand must be set in the low pressure (-)
position to apply detergents.
Step 2
Fill the detergent container with Karcher
detergent. Place the filter end of detergent
suction tube into the container.
Step 3
Turn on the pressure washer.
Pull trigger to operate unit: Liquid detergent is
drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.
Caution
Never use:
• Bleach, Chlorine products and other
corrosive chemicals
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
The following Kärcher detergents are
available:
• All Purpose & Vehicle Cleaner
• Exterior House Cleaner
• Deck & Patio Cleaner
• Heavy Duty Degreaser
In USA Call:
1-800-537-4129
or visit our website:
www.karcher-usa.com