1. DL manuals
  2. Karcher
  3. Pressure Washer
  4. K 3.67 M
  5. Operator's Manual

Karcher K 3.67 M Operator's Manual

Summary of K 3.67 M

  • Page 1

    High pressure washer operator manual overview ................................................. 2 precautions ........................................ 3 - 4 assembly instructions ............................ 4 operating instructions ............................ 5 using the accessories .................

  • Page 2: Never !

    2 never point nozzle at people or animals. Never drink alcohol or use drugs while operating this equipment. Never operate while standing in water. Never touch plug with wet hands. Never let electrical connections rest in water. Never operate pressure washer without the water turned on. Never use hot...

  • Page 3: Safety Warnings

    3 safety warnings when using this product basic precautions should always be followed: • read all the instructions before using the product. • high pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. • to r...

  • Page 4: Assembly Instructions

    4 important precautions – continued step 1 assembly instructions step 2 step 3 ! 5 step 4 step 5 pull out the locking slide from the right side of the trigger gun handle (a), and insert the small end of the high pressure hose into place (b). Push the locking slide back into the trigger gun to lock t...

  • Page 5: Operating Instructions

    5 operating instructions step 1 connect the high pressure hose to the high pressure outlet. Step 3 connect the garden hose to the water inlet. Step 4 connect garden hose to the cold water source and turn water on completely. Plug the power cord into the power outlet. Step 2 insert the spray wand of ...

  • Page 6: Using The Accessories

    6 using the accessories this wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This wand combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle. Not recommended for s...

  • Page 7: Working With Detergents

    7 working with detergents step 3 turn on the pressure washer. Pull trigger to operate unit: liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface. Step 2 fill detergent tank with 1.0 l of kärcher detergent. Caution never ...

  • Page 8: Shutting Down & Clean-Up

    8 step 5 disconnect the high pressure hose from the high pressure outlet. 1. Disconnect all water connections. 2. Turn on the machine for a few seconds, until the water which had remained in the pump exits. Turn off immediately. 3. Do not allow high pressure hose to become kinked. Shutting down & cl...

  • Page 9: – Continued

    9 winterizing and long-term storage – continued 5) cleaning the water inlet filter pull out the water in- let filter with flat-nose pliers and rinse out in warm water. Maintenance the unit is maintenance-free. 6) cleaning the detergent inlet filter pull it out and rinse out in warm water. Cleaning t...

  • Page 10: Cleaning Tips – Continued

    10 cleaning tips – continued optional cleaning accessories are available to further enhance your cleaning capabilities: for details call 1-800-465-4980 or visit www.Karcher.Ca optional cleaning accessories • rotating wash brush • wash brush • underbody wand • pipe drain cleaner • sandblasting attach...

  • Page 11: Troubleshooting

    11 troubleshooting disconnect the machine from the power source before making any repair. Symptom motor will not start. Unit does not reach high pressure. Output pressure varies high and low. Cause on/off switch is in the “off” (o) position. Power cord is not plugged in. Extension cord is too long. ...

  • Page 12

    12 troubleshooting – continued solution dilute detergent. Turn spray wand tip to low pressure position. Blow out or remove debris with a fine needle. Insert the spray wand into the trigger gun. Carefully press in against the spring tension and twist into the locked position. Call customer service. C...