LabStyle Dario User Manual - page 14
14
ASSEMBLING THE DARIO™ SYSTEM FOR THE FIRST TIME
Setting up the Dario™ System for the first time includes the following steps
described in this section:
Inserting a test strip cartridge (see
“Inserting the Test Strip Cartridge” on this
page
)
Inserting a lancet (see
page 15
)
Setting lancet depth (optional) (see
page 16
)
Downloading the Dario™ application to your smart mobile device (see
page18
)
Setting up the Dario™ application on your smart mobile device using the
Dario™ app instructions or the instructions provided on the Dario™ website.
Both ends of the housing have covers that are removable. The lancet
cover is orange with the small opening. Please be careful not to put the
cartridge cover on the lancing end. This can damage the lancet and the
lancing device.
Inserting the Test Strip Cartridge
❖
To insert the test strip cartridge:
Remove the carbon paper from the device and open the white cover
1. Remove the new test strip cartridge from its pouch.
2. Hold the test strip cartridge with the side that opens, facing up (as shown below).
3. Insert the cartridge into the housing until it snaps into place.
4. Replace the housing cover by sliding it into place until it clicks.