LabStyle Dario User Manual - page 38
Other manuals for Dario:
User Manual, User Manual
of
61
38
A Connecting... message appears, followed by INSERT A NEW STRIP.
STEP THREE- REMOVE A TEST STRIP FROM THE CARTRIDGE
You should have a test strip cartridge already inserted in your Dario™ housing. If
this is not the case, please go to
page 14
.
1. Wash your hands with warm soapy water and dry thoroughly. If you use alcohol
wipes to cleanse fingers, make sure the area is completely dry before lancing
finger.
2. Remove the Cartridge Cover of the Dario™ housing by pushing it outwards until
it comes off (use the removal indication lines)
.
3. Open the lid by pushing up the edge.