LabStyle Dario User Manual - page 47
47
REPLACING THE BATTERY
Your meter comes with one 3V CR1220 lithium battery installed. The battery
lasts up to one year depending on the usage. Follow the instructions below to
replace the battery.
1. Turn the meter over with the Dario logo facing down
2. Lift off the back cover by pulling firmly from the notch by the battery
cover, on the side of the glucose meter
3. Remove the battery by taking it out from the battery tray
4. Insert the new battery with the “+” side facing up and snap it into place
5. Press the back panel back in place until you hear a locking "click"
USED BATTERY DISPOSAL
Electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.