Lanier R/C MARINER 40 MK II ARF Instruction Manual - Top Wing Installation
Other manuals for MARINER 40 MK II ARF:
Assembly Instructions Manual, Assembly Instructions Manual, Owner's Manual, Instruction Manual, Assembly Manual, User Manual
Manual is about: Stinger II .46 ARF
of
15
11
Top Wing Installation
1.
Collect the following parts:
(2) Front cabane struts
(2) Rear cabane struts
(8) #2 x 3/8” screws
(4) #4 x 3/8” screws
Front Cabane Struts
Rear Cabane Struts
Dimple
Dimple
Dimple
2.
Hold the front cabane struts against the side
of the fuselage and identify the left and right.
There are three dimples on each side of the
fuselage for the front cabane struts and one
for the rear cabane struts.
3.
Once you have identified the left and right
front cabane struts, screw them to the bottom
of the top wing using the dimples to locate
them. Use two #4 x 3/8” screws.
Screw the rear cabane struts in place using
the dimples on the bottom of the wing to
locate them. Use two #4 x 3/8” screws.