Lanier R/C MARINER 40 MK II ARF Instruction Manual - Mounting Cowl
Other manuals for MARINER 40 MK II ARF:
Assembly Instructions Manual, Assembly Instructions Manual, Owner's Manual, Instruction Manual, Assembly Manual, User Manual
Manual is about: Stinger II .46 ARF
of
15
Mounting Cowl
1.
Collect the following parts:
(1) Fuselage
(1) Cowl
(4) #2 x 3/8 screws
3.
Slide the cowl over the motor and onto the
fuselage, it should overlap to the 1/4” marks.
Center the cowl and tape the cowl in place.
Drill a 1/16” hole in two places on each side
making sure they go into the bulkhead and
screw in place.
mark
1.
Make a mark 1/4” behind the firewall on both
sides of the fuselage both top and bottom.
2.
It may be necessary to open the hole in the
center of the cowl to clear the prop hub
depending on the motor used.
Machine Guns
1.
Glue the machine guns to the top of the fuse-
lage just in front of the cockpit
14