Lanier R/C MARINER 40 MK II ARF Instruction Manual - N-Strut Installation
12
4.
The wing can now be placed on the fuselage
and the screws installed holding the cabane
struts to the fuselage.
N-Strut Installation
1.
Collect the following parts:
6 pieces n-strut
(8) #2 x3/8” screws
2.
Reinstall the bottom wing on the plane.
Take one short strut and one long strut and
attach to the top front post on the top wing.
Attach the short strut to the front post on the
bottom wing.
Attach the other short strut to the rear post of
the bottom wing with the other end of the long
strut
Attach the other end of the rear short strut to
the rear post on the top wing.
3.
Repeat step 2 for the other side.
Installing Motor & ESC
1.
Collect the following parts:
(1) Fuselage
(1) Motor (Not Included)
(1) Electronic Speed Control (Not Included)
(1) Screw for motor installation (Not Included)
Note:
Read the instructions that come with your
motor and speed control for proper wiring.
Your Motor and Speed Control might be dif-
ferent than shown.