NanoCam Plus NCP-DVR1080 User Manual - page 11
11
2.6.4 Video Mode
When the Car DVR is powered up the video screen will start by default. In this screen recording will automatically start and
can be stopped by pressing the (Rec/Ok) Button. To access the Video Menu, ensure that the Car DVR is not recording
then press the (Menu) button.
2.7 Video Menu
2.7.1 Resolution
Resolution
sets the video quality. Higher resolution video will capture more detail and will also produce larger files. To
change the recording resolution, please follow the instructions below.
1. Press the (Rec/Ok) Button to stop the Car DVR from recording.
2. Press the (Menu) Button to enter the Video Menu.
3. Use the and Buttons to navigate the Settings Menu and highlight the Resolution setting and press (Rec/Ok) to
select.
4.
Use the and Buttons to highlight your required resolution, then press the (Rec/Ok) button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Higher resolution clips will create larger files which will fill the Micro SD Card faster.
2.7.2 Loop Recording
Loop
recording
allows you to set the duration that the camera will record before creating a new clip. To set the clip length
please follow the instructions below.
1. Press the (Rec/Ok) Button to stop the Car DVR from recording.
2. Press the (Menu) Button to enter the Video Menu.
3. Use the and Buttons to navigate the Settings Menu and highlight the Loop Recording setting and press (Rec/Ok)
to select.
4.
Use the and Buttons to highlight your required Clip Length, then press the (Rec/Ok) button to confirm your
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Selecting the OFF option will create the longest possible clip, in most cases depending on the set resolution and other factors this
will be limited to 10MB.
3. To avoid filling the card quickly it is advised to use the 2 or 3 minute options.