NanoCam Plus NCP-DVR1080 User Manual - page 18
18
3.1.9 Exposure
Exposure is used to manually control the light settings. To change the Exposure setting follow the instructions below
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight the Exposure setting and press (Rec/Ok) to select.
4.
Use the and Buttons to highlight your required Exposure setting, then press the (Rec/Ok) button to confirm your
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access
the menu.
3.1.2.0 Quick Review
Quick review displays the photo on screen for the set amount of time after the photo has been taken. To change the Quick
Review setting follow the instructions below.
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight the Quick Review setting and press (Rec/Ok) to
select.
4.
Use the and Buttons to highlight your required image diplay time setting, then press the (Rec/Ok) button to confirm
your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access
the menu.
3.1.2.1 Date Stamp
Date stamp is used to stamp your photos with the time and date that they are taken. To select your preferred time and date
format follow the instructions below.
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight the Date Stamp setting and press (Rec/Ok) to
select.
4.
Use the and Buttons to highlight either Date, Date/Time or ON, then press the (Rec/Ok) button to confirm your
selection.