NanoCam Plus NCP-DVR1080 User Manual - page 16
16
3.1.3 Sequence
When
Sequence is activated, when a photo is triggered a sequence of 3 photos is taken. To activate or deactivate
Sequence mode, follow the instructions below
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight Sequence setting and press (Rec/Ok) to select.
4.
Use the and Buttons to highlight OFF or ON, then press the (Rec/Ok) button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access
the menu.
3.1.4 Quality
Quality sets the image detail. Higher quality images will capture more detail and will also produce larger files. To change the
recording resolution, please follow the instructions below.
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight the Quality setting and press (Rec/Ok) to select.
4.
Use the and Buttons to highlight your required quality, then press the (Rec/Ok) button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access
the menu.
3.1.5 Sharpness
Sharpness sets the boldness of the image. Images with a stronger sharpness will create bolder images with stronger
outlines. To change the photo Sharpness, please follow the instructions below.
1. Enter the Photo screen.
2. Press the (Menu) Button to enter the Photo Menu.
3. Use the and Buttons to navigate the Photo Menu and highlight the Sharpness setting and press (Rec/Ok) to
select.
4.
Use the and Buttons to highlight your required sharpness, then press the (Rec/Ok) button to confirm your
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access
the menu.