NanoCam Plus NCP-DVR1080 User Manual - page 21
21
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed via the
Video and Photo Menus.
3. Even when the screensaver is activated and the screen goes into sleep mode, the camera will continue recording.
3.2.6 Format
The
Format setting is used to format the inserted Micro SD card. This optimises the Micro SD for the DVR and deletes all
data from the inserted Micro SD card. It is recommended that you format your Micro SD card before attempting to use the
DVR. To format an inserted Micro SD card, please follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the (Menu) Button to enter the Video Menu.
3. Press the (Menu) Button again to enter the Settings Menu.
4. Use the and Buttons to navigate the Settings Menu and highlight the Format Setting and press (Rec/Ok) to
select.
5.
Select OK to confirm and press the (Rec/Ok) Button.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Formatting your
Micro SD Card will delete all files from the card. Once these files have been deleted you will not be able to recover
them.
3.2.7 Default Settings
Default Settings is used to revert the DVR’s settings to their default settings. To reset the camera to restore the default
settings, please follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the (Menu) Button to enter the Video Menu.
3. Press the (Menu) Button again to enter the Settings Menu.
4. Use the and Buttons to navigate the Settings Menu and highlight the Default Settings setting and press (Rec/
Ok) to select.
5. Use the and buttons to highlight OK, then press the (Rec/Ok) button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed via the
Video and Photo Menus.