National Instruments NI 9516 Operating Instructions And Specifications - Off—No Module Faults.
24
|
ni.com
|
NI 9516 Operating Instructions and Specifications
•
Lit—The power supply (Vsup) is connected and the forward
limit, reverse limit, or home input is active.
Axis Fault
The Axis Fault LED (red) has two states to indicate the presence of
a fault in the system. Refer to the
NI SoftMotion Module book of
the
LabVIEW Help for a list of module faults and troubleshooting
information.
•
Off—No module faults.
•
Lit—One or more module faults.
Sleep Mode
This module supports a low-power sleep mode. Support for sleep
mode at the system level depends on the chassis that the module is
plugged into. Refer to the chassis manual for information about
support for sleep mode. If the chassis supports sleep mode, refer to
the software help for information about enabling sleep mode. Visit
ni.com/info
and enter
cseriesdoc
for information about
C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system