National Instruments NI 9516 Operating Instructions And Specifications - page 31
NI 9516 Operating Instructions and Specifications
|
© National Instruments
|
31
Input current......................... ≤250 µA
Digital logic levels, ON state
Input voltage ........................ 11 to 30 V
Input current......................... ≥2 mA
Digital input configured for sourcing
Digital logic levels, OFF state
Input voltage ........................ 11 to 30 V
Input current......................... ≤1 mA
Digital logic levels, ON state
Input voltage ........................ ≤5 V
Input current......................... ≥2 mA
Min pulse width
1
............................... 50 µs
MTBF ............................................... Contact NI for Bellcore
MTBF or MIL-HDBK-217F
specifications.
1
Assumes the minimum filter setting. Refer to the
NI SoftMotion Module book of the
LabVIEW Help for more information about filter options.