National Instruments NI 9516 Operating Instructions And Specifications - Tip
NI 9516 Operating Instructions and Specifications
|
© National Instruments
|
9
NI 9516 Connection Options
National Instruments offers several options for connecting the
NI 9516 to servo drives. You can use the NI 9514/16 to AKD cable
with the AKD analog servo drive and AKM series servo motors
from NI. To connect to third-party servo drives use the NI 951x
Cable and Terminal Block Bundle. Refer to Figure 3 for the 37-pin
terminal block pin assignments. Refer to the
NI 951x User Manual,
which you can download from
ni.com/manuals
, for information
about additional connection accessories and cabling
recommendations.
Tip
NI offers AKD analog servo drives and matched
servo motors. Refer to
Getting Started with NI 9514/16
C Series Drive Interface Modules and AKD Analog Servo
Drives for installation and configuration information.
Refer to the
Getting Started with NI 951x C Series Drive
Interface Modules and LabVIEW
for information about
using the NI 9516 with other devices.
How to Connect the NI 9516 to Drives and I/O
Complete the following steps to connect the NI 9516 servo drive
interface module to drives and other I/O.