North Invent SL150-01.MON.03 User Manual - Sealine Mk3 Monitors
SeaLine MK3 Monitors
Specifications subject to changes without prior notice.The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
24
Brightness specifies the darkness or lightness of a color. It is measured in
percent from black (0) to white (100). At 0% brightness, both hue and
saturation are meaningless.
Value: 0-100%
Contrast is the difference in light intensity between the brightest white and the
darkest black.
Value: 0-100%
Saturation sets the brilliance and purity of a color, that is how much grey is in
the color. A highly saturated hue (pure color) has a vivid, intense color, while
a less saturated hue appears more muted and grey. At 0% saturation, hue is
meaningless.
Value: 0-100%
Hue is what most people refer to as color. A blue button has the hue blue. It
is the dominant wavelength of a color.
Value: 0-100%
The color can be set to Default, User, Cold, or Warm:
Cold: The predominant tones are blue and violet.
Warm: The predominant tones are red and orange.
User: Activates the menu items Red, Green, and Blue, where the value can
be set between 0-100 %.
Value: Default, User, Cold, or Warm
Warning !
Manual setting of above parameters away from the factory default or ECDIS
settings may inhibit visibility of information, particularly when using the night
color tables.
Factory default settings of Brightness, Contrast, Saturation, Hue, Red, Green
and Blue are 50%