North Invent SL150-01.MON.03 User Manual - Sealine Mk3 Monitors
SeaLine MK3 Monitors
Specifications subject to changes without prior notice.The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
4
Where “SL” stands for Sea Line, “150/190/213/231” for the display’s Size, “01/02” for the hardware Revision,
“MON“ for Monitor, “03” for Version MK3 and “xxxx” for identification of minor variants (bezel colors, flash logo,
OEM labels etc.).
x
Each Monitor is constituted by the following set of components:
-
Front glass with the User Interface Panel
-
Display Frame and all necessary electronic components
-
Rear cover and Terminal plate
-
1 x Power AC Cable / 1 x DC plug / 1 x VGA Cable
-
4 x M6 x 25, Stainless Steel screws for front mounting / 4 x Cover for M6 screws
(optional)
-
Stand
-
Turntable
-
Sunshade
x
Each Monitor presents the following materials and features:
-
The Front, Display Frame, Cover, Stand, Turntable and Sunshade are made of Marine Grade
Aluminium allowing to reduce weight while eliminating corrosion problems.
-
The electronic set of components includes a specifically designed Power Supply, a high quality Display
Controller, a Backlight Inverter, with sealed transformers, and a custom-made Interface Board.
-
All our Monitors use identical Power Supply and User Panel. The Power Supply can be supplied with
115/230 VAC and/or 24 VDC, and even be used as a part of an UPS.
-
All our Monitors can be flush mounted (front or back tightened with stainless screws) or used as free
standing units with use of a Stand and/or a Turntable.
-
Furthermore, when flush mounted, all our Monitors can be water- and dust- tight sealed, with the use of
optional Sealing Kits, to be mounted at the back of the display frame into the dedicated sealing groove.
These specific (per size of Monitor) Sealing Kits being recommended to further protect all electronics,
against harsh environment.
-
All our Monitors come with VGA, DVI, S-Video and Composite video inputs, and a RS232 input for
remote control purposes.
-
Pixel pitch on all displays are 0,294 mm both in x and y direction. This pixel pitch equals 1 m viewing
distance with a viewing angle of 1 minute of arc as required in IEC 62.388 section 6.13.2.b.
Nominal viewing distance in a normal environment is 1,0 m.