North Invent SL150-01.MON.03 User Manual - Sealine Mk3 Monitors
SeaLine MK3 Monitors
Specifications subject to changes without prior notice.The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
27
If new mode parameters have been entered it is possible to delete them by
using the ‘Clear’ button.
The Horizontal Total should be equal to, or higher than, the horizontal
resolution plus horizontal position (See explanation under ‘Horizontal
position’).
The phase settings stabilize the picture by removing horizontal noise and
sharpening the image of characters.
The value for the horizontal resolution of the display is adjusted here.
The vertical resolution of the display is adjusted here.
The chosen value decides where the picture is placed horizontally on the
display. Horizontal position is equal to the horizontal front porch +
horizontal back porch, which is the field used to specify the number of
dummy pixel clocks to insert at the beginning (pulsing the line clock pin)
and end of each line or row of pixels before. After the line clock for the
previous line has been negated, the value in horizontal back porch is used
to count the number of pixel clocks to wait before starting to output the first
set of pixels in the next line.
The value decides where the picture is placed vertically on the display.
Info
Control
Function
Information about the software version.
Information about the temperature in the Monitor.
Information about the voltage entering the print.
Information about the voltage internally generated on the print.