Oceanic VEO 2.0 Operating Manual - page 27
27
> TLBG with the max accumulation segment flashing, others
fixed up to end of dive accumulation. All segments flashing
if a Delayed Violation. No TLBG if Gauge Mode.
> VARI, max Ascent Rate sustained for 4 sec
> NX, (PZ+), CF, DS icons - those that apply
• S (< 2 sec) to access Data 2 for that dive.
• S (2 sec) to revert to the Data 1 screen.
• S (press) to activate SmartGlo Backlight.
Log Data 2, information includes (Fig. 13):
> Log Mode (book) icon
> Temperature (minimum that dive) with ° icon and graphic F
(or C)
> Graphic SEA (or EL2 to EL7), indicating the Altitude at
which the dive was conducted
• S (< 2 sec) to access Data 3 for that dive; or revert to
Preview if a GAUG dive.
• S (2 sec) to revert to the Data 2 screen.
• S (press) to activate SmartGlo Backlight.
Fig. 12B - LOG DATA 1
(Deco during dive)
Fig. 13 - LOG DATA 2