Oceanic VEO 2.0 Operating Manual - page 96
Manual is about: Dive Computer
of
106
96
RETURNING THE MODULE TO BOOT
• If the boot was fitted with a spacer and it was previously removed, replace the spacer
into the boot.
• Orient the module over the opening in the boot, and dip the bottom edge into it while
pressing the top edge with the palm of your hand. Stop pressing when the bottom
edge of the module has just entered the boot.
• Correct the alignment of the module as needed so that it is straight.
• Press the module completely into place with your thumbs, watching the alignment,
until it snaps into place.