Oceanic VEO 2.0 Operating Manual - page 34

34

Set DTR Alarm, information includes (Fig. 24):

>  Graphics SEt and DTR -

>  Time Value (min) flashing with min icon 

•  A (hold) to scroll upward through Set Points at a rate of 8 

per second from OFF to 5 through 20 (min) in increments 

of 1 min. 

•  A (< 2 sec) to step upward through Set Points one at a time.

•  S (< 2 sec) to save the setting and access Set PO2 Alarm.

•  S (2 sec) to revert to Set TLBG Alarm.

Set PO2 Alarm, information includes (Fig. 25):

>  Graphic SEt with NX icon

>  Set Point value (ATA) flashing with PO2 and MAX icons 

•  A (< 2 sec) to step upward through Set Points from 1.20 to 

1.60 one at a time.

•  S (< 2 sec) to save the setting and revert to the Set A Menu.

•  S (2 sec) to revert to Set DTR Alarm.

Fig. 24 - SET DTR AL

Fig. 25 - SET PO2 AL