Oceanic VEO 2.0 Operating Manual - page 88

88

PC INTERFACE

The VEO is configured with a Data Port located on the side of 

the module (Fig. 106a) that enables it to be connected to a PC 

through a USB port using a special interface cable that is avail-

able as an optional accessory.  

The USB Driver required for the interface system is download-

able from the Oceanic Worldwide web site. 

The Settings Upload portion of the program can be used to set/

change the Set A group (Alarms), Set U group (Utilities), and Set 

T group (Time/Date) using the same Interface System.  The FO2 

and Mode settings must be entered using the button controls. 

Information available for retrieval* (downLoad) from the VEO to 

the PC Download portion of the program includes items such as 

dive number, surface interval time, depth, dive time, start date 

and time, lowest temperature, sampling rate, Set Points, TLBG, 

and VARI. 

*

FREE Dive information is only available using the PC Interface system.

The VEO checks for the presence of an interface device connec-

tion to the Data Port once every second* while in Surface mode.  

*

Checks are not made if the Wet Activation contacts are wet.

Fig. 106 - DATA PORT

a