Oceanic VEO 2.0 Operating Manual - page 32
32
Fig. 19 - SET A LEAD-IN
SET A MENU (NORM/GAUG ALARMS)
Sequence >> Lead-in >> Aud >> Depth >> EDT >> TLBG* >> DTR* >>
PO2*
*Items apply to NORM only
Set Points remain as set until changed.
Set A Lead-in, information includes (Fig. 19):
> Graphics SEt and A
• A (< 2 sec) to step forward to Set U Lead-in.
• S (< 2 sec) to access Set Audible Alarm.
Set Audible Alarm, information includes (Fig. 20):
> Graphics SEt and AUD -
> Set Point graphics ON (or OFF) flashing
• A (< 2 sec) to toggle ON/OFF.
• S (< 2 sec) to save the setting and access Set Depth Alarm.
• S (2 sec) to revert to Set A Lead-in.
Set Depth Alarm, information includes (Fig. 21):
> Graphics SEt and -dA
> Graphic OFF or Depth value flashing with MAX and FT (or
M) icons
• A (< 2 sec) to step upward through Set Points one at a time.
Fig. 20 - SET AUD AL
Fig. 21 - SET DEPTH AL