Oceanic VEO 2.0 Operating Manual - page 28

28

Log Data 3, information includes (Fig. 14):

>  Log Mode (book) icon

>  O2% at end of dive, 2 dashes if Violation Gauge Mode, with 

O2SAT icons

>  Highest PO2 (ATA) reached during the dive with PO2 and 

MAX icons

>  FO2 Set Point (or graphic Air) with FO2 icon

>  NX, (PZ+) icons - if they apply

•  S (< 2 sec) to revert to the Preview screen.

•  S (2 sec) to revert to the Data 2 screen.

•  S (press) to activate SmartGlo Backlight.

SET F MENU (NORM FO2)  

Sequence >> FO2 value >> 50% Default

With the FO2 50% Default selection set Off, the VEO will remain set at the last FO2 Set 

Point for that period of activation.

When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 minutes 

on the surface after that dive the FO2 will be displayed as 50 and further dives will be 

calculated based on 50% O2 for oxygen calculations and 21% O2 for Nitrogen calcula-

tions (79% Nitrogen), unless FO2 is set before the dive. 

Fig. 14 - LOG DATA 3