Oceanic VEO 2.0 Operating Manual - page 38

38

When CF is set On, NDLs are reduced to values equivalent to those 

that would be available at the next higher 3000 foot (915 meter) 

Altitude.  Refer to tables in back of manual. 

Set Backlight Duration (Glo), information includes (Fig. 33):

>  Graphics Set and GLO -

>  Time Set Point flashing with sec icon

•  A (< 2 sec) to step upward through Set Points of 0, 5, and 

10 (sec) one at a time.

•  S (< 2 sec) to save the setting and access Set SR.

•  S (2 sec) to revert to Set CF.

Backlight (Glo) Duration is the time the backlight will remain On 

after S is released (0 = no additional time).

Set Sampling Rate (SR), information includes (Fig. 34):

>  Graphics Set and SR -

>  Time Set Point flashing with sec icon

•  A (< 2 sec) to step upward through Set Points of 2, 15, 30, 

and 60 (sec) one at a time.

•  S (< 2 sec) to save the setting and revert to Set U Lead-in.

•  S (2 sec) to revert to Set Glo.

Sampling Rate is the frequency at which data is sampled and stored 

for download to the OceanLog PC Interface program.

Fig. 33 - SET GLO

Fig. 34 - SET SAMPLING