Oki MC770 series Maintenance Manual - page 62

45376001TH  Rev.1 

61 /

Oki  Data  CONFIDENTIAL

3. Set up

For฀Mac฀OS฀X

When฀ the฀ optional฀ device฀ has฀ been฀ added฀ into฀ in฀ Mac฀ OS฀ X฀ before฀ installing฀ the฀

printer฀ driver,฀ the฀ device฀ information฀ is฀ gotten฀ automatically.฀ However,฀ if฀ the฀ printer฀

is฀ connected฀ by฀ [IP฀ print]฀ and฀ [Bonjour],฀ the฀ device฀ information฀ could฀ not฀ be฀ gotten฀

automatically.

If฀ the฀ printer฀ is฀ connected฀ by฀ [AppleTalk],฀ the฀ device฀ information฀ could฀ also฀ not฀ be฀

gotten฀ automatically฀ when฀ the฀ optional฀ device฀ has฀ been฀ added฀ into฀ in฀ Mac฀ OS฀ X฀

before installing the printer driver.

Please฀inish฀the฀following฀setting฀procedure฀for฀above.

฀ Open฀System฀Preferences฀and฀click฀[Print฀&฀Scan].

฀ Select฀[OKI-MC780],฀click฀[Options฀&฀Supplies].

฀ Click฀[Driver].

฀ Set฀the฀following฀options.

•฀Model฀Selection฀-฀Choose฀this฀for฀using฀your฀model.

•฀Finisher

฀฀Not฀Installed฀― Select this if a finisher is not installed.

฀฀Inner฀Finisher฀(1฀Tray)฀―-฀Select฀this฀when฀the฀Inner฀Finisher฀is฀installed.

Notes!

•฀ Even฀ if฀ you฀ choose฀ [Not฀ Installed]฀ for฀ the฀ Finisher฀ option฀ during฀ print฀

settings,฀ the฀ inisher฀ options฀ such฀ as฀ stapling฀ can฀ be฀ selected.฀ If฀ you฀

select the finisher options for printing but the finisher is not installed, 

inisher฀settings฀will฀be฀ignored฀and฀printing฀will฀be฀performed฀correctly.

•฀Trays

฀฀Tray฀1

฀฀Select฀this฀when฀the฀tray฀1฀is฀installed.

฀฀Tray฀1฀and฀2

฀฀Select฀this฀when฀the฀tray฀1฀and฀2฀are฀installed.

฀฀Tray฀1,฀2฀and฀3

฀฀Select฀this฀when฀the฀tray฀1,฀2฀and฀3฀are฀installed.

฀฀Tray1,฀2,฀3฀and฀4

฀฀Select฀this฀when฀the฀tray฀1,฀2,฀3฀and฀4฀are฀installed.

฀ Click฀[OK].