Oki MC770 series Maintenance Manual - page 87
Other manuals for MC770 series:
User Manual, User Manual, User Manual, User Manual, Material Safety Data Sheet, Setup Manual, User Manual, User Manual, Setup Manual, User Manual, Maintenance Manual
Manual is about: Controller Unit
of
217
45376001TH Rev.1
86 /
Oki Data CONFIDENTIAL
4. Component replacement
4.2.20 Cover Assy front/ Board-RSF/MPT hopping
roller/ Frame Assy separator/ Feeder Assy regist
(1) Open the top cover.
(2) Remove the plate shield and remove the connector. (See section 4.2.9)
(3) Disengage the claws of stay L and remove the Cover-Assy-front ① .
(4) Remove the E Ring ② and remove the Clutch ③ .
(5) Remove the supporters (2 places), and remove the frame Assy separator ④ and
spring ⑤ .
(6) Remove the four screws(silver, No:42920406) ⑥ and remove the feeder unit ⑦ .
(7) Remove the E Ring ⑧ and remove the Clutch ⑨ .
(8) Disengage the claw, and remove the cover sensor ⑩ .
(9) Remove the connector and remove the Board-RSF ⑪ .
①
stay L
②
③
④
⑤
⑥
×4
⑦
⑧
⑨
⑩
⑪
Claw