Sabiana Carisma Fly CVP–ECM Installation, Use And Maintenance Manual - page 30
!
IMPOSTAZIONE
DEL SET
DESIDERATO
Premendo i pulsanti (+) o (-)
aumentare o diminuire
il valore della temperatura
desiderata.
Una volta impostato
il valore desiderato, premere
il tasto ON/SEND per trasmettere
l’informazione al ventilconvettore.
3ELEZIONEMODALITË
DIFUNZIONAMENTO
- Premere i tasti (+) o (-)
per modificare il set relativo
alla temperatura desiderata.
4RASFERIMENTO
MODALITËDIFUNZIONAMENTO
- Per inviare l’informazione
all’apparecchio
premere il tasto ON/SEND.
SETTING
THE SET POINT
PROGRAMMATION
DE LA TEMPERATURE
CONSIGNE VOULUE
EINSTELLUNG DES
GEWÜNSCHTEN
SOLLWERTS
PROGRAMACIÓN
DEL SET DESEADO
INSTELLING
VAN DE
GEWENSTE SET
Press the (+) or (-) button
to increase or decrease
the desired temperature value.
Once having set the desired
value, press the ON/SEND button
to send the information
to the fan coil unit.
3ELECTING
THEOPERATINGMODE
- Press the (+) or (-) button
to modify the desired
temperature set point.
4RANSFERRING
THEOPERATINGMODE
- To send the information
to the appliance
press the ON/SEND button.
À l’aide des touches (+) ou (-)
augmenter ou diminuer
la température voulue.
Après avoir programmé
la température voulue appuyer
sur la touche ON/SEND
pour transmettre l’information
à l’appareil.
3ÏLECTION
MODEDEFONCTIONNEMENT
-
À l’aide des touches (+) ou (-)
modifier la température
de
consigne.
2 - Transmission
MODEDEFONCTIONNEMENT
- Pour envoyer l’information
à l’appareil appuyer
sur la touche ON/SEND.
Durch Drücken der Tasten
(+) und (-) den gewünschten
Temperaturwert erhöhen
oder vermindern.
Sobald der gewünschte Wert
erreicht ist, die Taste ON/SEND
drücken, um die Information
an den Klimakonvektor
zu übertragen.
7AHL
DES"ETRIEBSMODUS
- Mit den Tasten (+) und (-)
den gewünschten Temperatur-
Sollwert
einstellen.
ÃBERTRAGUNG
DES"ETRIEBSMODUS
-
Zur
Übertragung
von Informationen zum Gerät
die Taste ON/SEND drücken.
Pulsando las teclas (+) o (-)
aumente o disminuya el valor
de la temperatura deseada.
Una vez que se ha programado
el valor deseado
pulse la tecla ON/SEND
para transmitir la información
al ventilador convector.
3ELECCIØNDELAMODALIDAD
DEFUNCIONAMIENTO
- Pulse las teclas (+) o (-)
para modificar el punto
de ajuste relativo
a la temperatura deseada.
4RANSFERENCIADELAMODALI
DADDEFUNCIONAMIENTO
- Para enviar la información
al
aparato
pulse la tecla ON/SEND.
Druk op de toetsen (+) en (-)
om de gewenste temperatuur
te verhogen of te verlagen.
Van zodra de gewenste waarde
ingesteld is, druk op de toets
ON/SEND om de informatie naar
de ventilator-convector te sturen.
+EUZEWERKWIJZE
- Druk op de toetsen (+) en (-)
om de relatieve set
te wijzigen in functie van
de gewenste temperatuur.
/VERDRACHTWERKWIJZE
- Om de informatie
naar het apparaat te sturen,
druk op de toets ON/SEND.