VCON VIGO Installation And Setup Manual - Assembling The Vigo Tower
of
48
Chapter 2 System Installation and Connections
VCON ViGO Installation and Setup Guide
2–3
Assembling the ViGO Tower
The ViGO consists of two main parts: the base and the tower. They are packed
separately in the shipping package. The tower mounts easily onto the top of the
base.
³
To assemble the ViGO tower
1. Remove the cover from the tower hole on the ViGO base.
2. Place the base on a flat surface so that the side with the buttons, LEDs, and
tower hole are on top.
3. Insert the tower into the hole as far as possible so that it sits securely.
4. Turn the tower so that the speaker faces the front (towards the buttons and
LEDs).
CAUTION Do not connect the ViGO to a power supply before assembling
the system and connecting the accessories.